Laser Safety Glasses EN207

Need laser protection that meets the European standard?

Laser Safety Glasses EN207

Laser Safety Glasses EN207Laser safety glasses used in Europe must meed the EN207 rating to be acceptable. If you are working with a laser in a European country, it’s imperative that you understand the EN207 rating and can ensure that your eyewear qualifies for being used with your laser.
The first step is to determine whether your glasses are rated for the type of beam your laser emits. There are four beam types in EN207, and each has a respective symbol (shown in parenthesis):

  • Continuous wave (D)
  • Pulsed (I)
  • Giant pulsed (R)
  • Modelocked (M)

If you’re using a continuous wave laser and your laser safety glasses aren’t marked with a “D” in the protection rating, you need new laser safety glasses.

The next step is to determine the operating wavelength of your laser to see if your glasses are blocking it. Generally, laser safety glasses block a range of wavelengths surrounding your laser’s operating wavelength. For instance, if your laser is a continuous wave laser that operates at 532nm, your laser safety glasses may say “D 500-600 L6″. The “500-600″ means that your glasses block the wavelengths 500nm-600nm, which includes 532nm, the operating wavelength of your laser.

Finally, you need to check what protection level is required for your laser. This is what the “L6″ part of the above example specification was describing. The “L number” describes the lowest optical density that the glasses block the laser wavelength range marked on the glasses at. So, in the above example, your glasses block 500-600nm at an optical density of at least 6 throughout that range.

The final thing to keep in mind is that the EN207 specification requires that your glasses have resistance to melting and burning from a direct beam. They should be able to withstand a direct beam hit for a sustained 10 seconds from a continuous wave laser, or 100 beam hits from a pulsed laser.

Shop Laser Safety Glasses

If you’re looking for laser safety glasses with EN207 ratings, you can find them online at a variety of stores. If you have any questions about EN207 laser safety glasses, how to get them, what you need, or what’s right for your laser, please don’t hesitate to leave a comment below. Thanks for reading, and stay safe!

There are no comments yet. Be the first and leave a response!

Leave a Reply

Wanting to leave an <em>phasis on your comment?

Trackback URL http://lasersafetygoggles.com/laser-safety-glasses-en207/trackback/

Laser Safety Glasses EN207

Need laser protection that meets the European standard?

Laser Safety Glasses EN207

Laser Safety Glasses EN207Laser safety glasses used in Europe must meed the EN207 rating to be acceptable. If you are working with a laser in a European country, it’s imperative that you understand the EN207 rating and can ensure that your eyewear qualifies for being used with your laser.
The first step is to determine whether your glasses are rated for the type of beam your laser emits. There are four beam types in EN207, and each has a respective symbol (shown in parenthesis):

  • Continuous wave (D)
  • Pulsed (I)
  • Giant pulsed (R)
  • Modelocked (M)

If you’re using a continuous wave laser and your laser safety glasses aren’t marked with a “D” in the protection rating, you need new laser safety glasses.

The next step is to determine the operating wavelength of your laser to see if your glasses are blocking it. Generally, laser safety glasses block a range of wavelengths surrounding your laser’s operating wavelength. For instance, if your laser is a continuous wave laser that operates at 532nm, your laser safety glasses may say “D 500-600 L6″. The “500-600″ means that your glasses block the wavelengths 500nm-600nm, which includes 532nm, the operating wavelength of your laser.

Finally, you need to check what protection level is required for your laser. This is what the “L6″ part of the above example specification was describing. The “L number” describes the lowest optical density that the glasses block the laser wavelength range marked on the glasses at. So, in the above example, your glasses block 500-600nm at an optical density of at least 6 throughout that range.

The final thing to keep in mind is that the EN207 specification requires that your glasses have resistance to melting and burning from a direct beam. They should be able to withstand a direct beam hit for a sustained 10 seconds from a continuous wave laser, or 100 beam hits from a pulsed laser.

Shop Laser Safety Glasses

If you’re looking for laser safety glasses with EN207 ratings, you can find them online at a variety of stores. If you have any questions about EN207 laser safety glasses, how to get them, what you need, or what’s right for your laser, please don’t hesitate to leave a comment below. Thanks for reading, and stay safe!

There are no comments yet. Be the first and leave a response!

Leave a Reply

Wanting to leave an <em>phasis on your comment?

Trackback URL http://lasersafetygoggles.com/laser-safety-glasses-en207/trackback/

Laser Safety Glasses EN207

Need laser protection that meets the European standard?

Laser Safety Glasses EN207

Laser Safety Glasses EN207Laser safety glasses used in Europe must meed the EN207 rating to be acceptable. If you are working with a laser in a European country, it’s imperative that you understand the EN207 rating and can ensure that your eyewear qualifies for being used with your laser.
The first step is to determine whether your glasses are rated for the type of beam your laser emits. There are four beam types in EN207, and each has a respective symbol (shown in parenthesis):

  • Continuous wave (D)
  • Pulsed (I)
  • Giant pulsed (R)
  • Modelocked (M)

If you’re using a continuous wave laser and your laser safety glasses aren’t marked with a “D” in the protection rating, you need new laser safety glasses.

The next step is to determine the operating wavelength of your laser to see if your glasses are blocking it. Generally, laser safety glasses block a range of wavelengths surrounding your laser’s operating wavelength. For instance, if your laser is a continuous wave laser that operates at 532nm, your laser safety glasses may say “D 500-600 L6″. The “500-600″ means that your glasses block the wavelengths 500nm-600nm, which includes 532nm, the operating wavelength of your laser.

Finally, you need to check what protection level is required for your laser. This is what the “L6″ part of the above example specification was describing. The “L number” describes the lowest optical density that the glasses block the laser wavelength range marked on the glasses at. So, in the above example, your glasses block 500-600nm at an optical density of at least 6 throughout that range.

The final thing to keep in mind is that the EN207 specification requires that your glasses have resistance to melting and burning from a direct beam. They should be able to withstand a direct beam hit for a sustained 10 seconds from a continuous wave laser, or 100 beam hits from a pulsed laser.

Shop Laser Safety Glasses

If you’re looking for laser safety glasses with EN207 ratings, you can find them online at a variety of stores. If you have any questions about EN207 laser safety glasses, how to get them, what you need, or what’s right for your laser, please don’t hesitate to leave a comment below. Thanks for reading, and stay safe!

There are no comments yet. Be the first and leave a response!

Leave a Reply

Wanting to leave an <em>phasis on your comment?

Trackback URL http://lasersafetygoggles.com/laser-safety-glasses-en207/trackback/

Laser Safety Glasses EN207

Need laser protection that meets the European standard?

Laser Safety Glasses EN207

Laser Safety Glasses EN207Laser safety glasses used in Europe must meed the EN207 rating to be acceptable. If you are working with a laser in a European country, it’s imperative that you understand the EN207 rating and can ensure that your eyewear qualifies for being used with your laser.
The first step is to determine whether your glasses are rated for the type of beam your laser emits. There are four beam types in EN207, and each has a respective symbol (shown in parenthesis):

  • Continuous wave (D)
  • Pulsed (I)
  • Giant pulsed (R)
  • Modelocked (M)

If you’re using a continuous wave laser and your laser safety glasses aren’t marked with a “D” in the protection rating, you need new laser safety glasses.

The next step is to determine the operating wavelength of your laser to see if your glasses are blocking it. Generally, laser safety glasses block a range of wavelengths surrounding your laser’s operating wavelength. For instance, if your laser is a continuous wave laser that operates at 532nm, your laser safety glasses may say “D 500-600 L6″. The “500-600″ means that your glasses block the wavelengths 500nm-600nm, which includes 532nm, the operating wavelength of your laser.

Finally, you need to check what protection level is required for your laser. This is what the “L6″ part of the above example specification was describing. The “L number” describes the lowest optical density that the glasses block the laser wavelength range marked on the glasses at. So, in the above example, your glasses block 500-600nm at an optical density of at least 6 throughout that range.

The final thing to keep in mind is that the EN207 specification requires that your glasses have resistance to melting and burning from a direct beam. They should be able to withstand a direct beam hit for a sustained 10 seconds from a continuous wave laser, or 100 beam hits from a pulsed laser.

Shop Laser Safety Glasses

If you’re looking for laser safety glasses with EN207 ratings, you can find them online at a variety of stores. If you have any questions about EN207 laser safety glasses, how to get them, what you need, or what’s right for your laser, please don’t hesitate to leave a comment below. Thanks for reading, and stay safe!

There are no comments yet. Be the first and leave a response!

Leave a Reply

Wanting to leave an <em>phasis on your comment?

Trackback URL http://lasersafetygoggles.com/laser-safety-glasses-en207/trackback/